To fix the screen on your iPhone 11, you can follow these steps:

To fix the screen on your iPhone 11, you can follow these steps:

To fix the screen on your iPhone 11, you can follow these steps:

  1. Prepare the necessary tools: You'll need a replacement screen, a small Phillips screwdriver, a suction cup, a plastic pick or spudger, and a tri-wing screwdriver (optional, depending on the model).

  2. Power off your iPhone: Press and hold the power button until the "slide to power off" option appears. Swipe it to turn off your device.

  3. Remove the screws: Use the small Phillips screwdriver to remove the two screws at the bottom of the iPhone.

  4. Lift the display: Place the suction cup on the lower part of the screen, just above the home button. Gently pull up on the suction cup to create a slight gap. Insert the plastic pick or spudger into the gap and slide it along the edges to separate the display from the frame. Be careful not to apply too much pressure to avoid damaging the display cables.

  5. Disconnect the display cables: Once you've separated the display from the frame, you'll see a metal plate covering the display cables. Remove the screws holding the plate in place and lift it off. Then, disconnect the three display cables by carefully prying them up with the plastic pick or spudger.

  6. Remove the old screen: Once the display cables are disconnected, you can lift the entire display assembly away from the rest of the iPhone.

  7. Install the new screen: Take the replacement screen and carefully align it with the iPhone's frame. Gently press it down to ensure it's properly seated.

  8. Reconnect the display cables: Carefully reconnect the three display cables by aligning them with their respective connectors and pressing them down until they click into place. Then, replace the metal plate and screw it back in.

  9. Lower the display: Align the top part of the display with the frame and gently press it down to close the gap. Make sure it sits flush with the frame.

  10. Secure the screws: Use the small Phillips screwdriver to reinsert and tighten the two screws at the bottom of the iPhone.

  11. Power on your iPhone: Press and hold the power button until the Apple logo appears, indicating that your device is turning on.

After following these steps, your iPhone 11's screen should be fixed and ready to use. If you're not comfortable performing these steps yourself, it's recommended to seek assistance from a professional technician or visit Wireless Paradise in fort Myers and they will do all this for you. 

11741 s Cleveland Fort Myers Florida 33907

 

Map

 

Wireless Paradise

 

 

 

Back to blog

Leave a comment